Enamo Grip 5000

DESCRIPTION

Enamo Grip 5000 is a two component polyester high solids coating for protection against vapors, acid rain, and other harsh chemical environments while giving a car-like finish and UV protection. Can withstand Skydrol® hydraulic fluids used in aircraft when applied to flooring. Available in clear and custom colors.

TYPICAL USES

• Outstanding alkali resistance and very good acid resistance.
• For architectural and maintenance solutions.
• Hardwoods, pretreated metals, primed metals and concrete.
• Anywhere an acid and alkali resistant topcoat is required.

APPLICATION METHODS

Enamo Grip 5000 can be applied to metal, concrete, masonry, wood and other porous surfaces. The application can be by brush, roller, or airless sprayer. Enamo Grip 5000 will reach approximately 80% cure within 72 hours of application with the remaining 20% attained over a period of 12-15 days. Recoating within the initial 72 hours should not require any surface preparation. After 72 hours, the surface should be sanded to improve the profile to improve adhesion. For specific instructions on surface preparation, mixing, and application, please refer to the SPI’s application instructions for Enamo Grip 5000.

More Solutions:

Rust Grip® is our leading corrosion coating that eliminates 60% of project costs by avoiding the need to grit blast or dispose of hazardous waste (including asbestos).

Super Therm® is our solar heat blocking product that blocks 95% of solar heat load irrespective if the coating is clean or becomes dirty, it physically lacks the density to load and hold heat. Whether it is a building (roof), tanks, piping, containers or portable offices, if Solar Heat is an issue, Super ThermⓇ will stop the heat from loading all together taking a proactive approach to heat load and heat transfer.

Demo Applications:

Contact our team at Superior Product Coatings Africa to see if you qualify for a demo application of our leading energy saving or corrosion management solutions.