HSC® Coating

DESCRIPTION

HSC® Coating is designed to control heat transfer on surface temperatures up to 350°F degrees (176°C). It is water-borne, and extremely lightweight and smooth in appearance. HSC® Coating uses a special acrylic resin7. blend with specific ceramic compounds added to provide a non-conductive block against heat transfer.

HSC® Coating offers a “Green”, non-flammable, non- toxic formula for medium heat surface applications over standard steam pipe or oven wall construction. The coating was originally designed for hot applications where temperature exposures fall below those that would require the use of HPC® Coating. HSC® Coating is more easily applied for a smooth finish. It can be applied over metal, concrete, wood, and other substrates.

CHARACTERISTICS

TYPICAL USES

1. As an insulation system over hot pipes, tanks, and valves
2. To block heat migration into cold tanks, lines, and valves
3. Easily applied when a hot system cannot be shut down.

APPLICATION METHODS

HSC® Coating should be used for applications 350°F degrees(176°C) or lower. Apply HPC Coating for applications between 350°F degrees (176°C) and 700°F degrees (371°C). HSC® Coating can be applied to metal, concrete, masonry and wood.

The application can be by spray, brush or roller. For specific instructions on surface preparation, mixing and application, please refer to the SPI Application Instruction sheet for HSC Coating.

If HSC Coating is applied on surfaces outdoors, you must overcoat the HSC with Super Therm®, Rust Grip®, SP Liquid Membrane or Enamo Grip according to what is needed. It cannot be left uncoated and left exposed to weather conditions. It is light-weight to insulate, which leaves it vulnerable to weather conditions.

RESOURCES & DOWNLOADS

Product Documents

More Solutions:

Rust Grip® is our leading corrosion coating that eliminates 60% of project costs by avoiding the need to grit blast or dispose of hazardous waste (including asbestos).

Super Therm® is our solar heat blocking product that blocks 95% of solar heat load irrespective if the coating is clean or becomes dirty, it physically lacks the density to load and hold heat. Whether it is a building (roof), tanks, piping, containers or portable offices, if Solar Heat is an issue, Super ThermⓇ will stop the heat from loading all together taking a proactive approach to heat load and heat transfer.

Demo Applications:

Contact our team at Superior Product Coatings Africa to see if you qualify for a demo application of our leading energy saving or corrosion management solutions.